Pin: Phosphor bronze QSn6.5-0.1Y/δ0.4, Gold plating thickness≥6μin(or Customized according to customer requirements)
PCB: Glass fiber copper clad plate, UL94V-0, FR-4
Snap ring: Phosphor bronzeQSn6.5-0.1 T
Crimping cover: PC
Shield cover, screening can(Zinc alloy plating) (For shielding products)
Insertion force: Insert with standard RJ45 plug(The lock lever works) , Insertion force≤20N
Pull out force: After the standard RJ45 plug is inserted, pull out in the horizontal direction(The lock lever does not work)
Pull out force≤20N
Pull test: The computer plug is inserted into the socket and in the locked position. After the network cable is connected to the keystone jack, test the pulling force of the entire system: the system should be able to withstand a pulling force of 68N, 60±5S does not come out, pay attention to the applied rate shall not be greater than 44.5N/S
Suitable wire diameter: 0.35-0.60mm
Contact resistance: Under normal conditions, the contact resistance of the contact blade between the gold pin and the standard network plug (commonly known as RJ45 plug) of the brand new unused socket is ≤20mΩ.
Insulation resistance: Under normal conditions, the insulation resistance between adjacent gold pins is ≥500MΩ (DC100V)
Withstand voltage: Under normal conditions, apply DC1000V (AC700V) between adjacent gold pins for 1 minute, and there should be no breakdown or flying fox phenomenon
Link test: Near-end crosstalk(NEXT) , attenuation crosstalk ratio(ACR) and return loss(RL) meet the test requirements of the corresponding level of 90m link test.
Mechanical life of plug and pull: Under normal conditions, the standard RJ45 plug is inserted/pulled out for 750 times at a speed of 10-15 times/min (the elastic lock rod of the plug does not move), and the product is normally on (does not fail) with contact resistance ≤40mΩ
Mechanical life of wiring: With the wire punch down tool, press the standard CAT5E or other corresponding class cable into/out of the insert spring (IDC terminal) for 80 times, and it can still conduct normally.
After 24 hours of neutral salt spray test, the metal electroplated parts on the product have no visible rust oxidation